• 工程案例
  • 资料下载
  • 文章中心
  • 关于淞江
  • 橡胶接头
  • 减震器
  • 金属软管
  • 【NBR】球墨法兰耐油橡胶接头“电液集成系统”

    18-12-05

    【丁腈橡胶】球墨法兰耐油橡胶接头“电液集成系统”
    "Electro-hydraulic Integrated System" for Oil-Resistant Rubber Joints of Ductile Graphite Flanges

    皇冠手机网登录网址官方网站为您先容:【丁腈橡胶】球墨法兰耐油橡胶接头“电液集成系统”信息,淞江集团为电液集成系统生产一种耐油橡胶接头,主要采用丁腈橡胶生产,代号为N41,其中含量达到50%左右,有含量检测报告,也支撑各种第三方检测。
    The official website of Shanghai Songjiang Shock Absorber Group Co., Ltd. introduces to you: [NBR] information of "electro-hydraulic integrated system" for spheroidal graphite flange oil-resistant rubber joint. Songjiang Group produces an oil-resistant rubber joint for the electro-hydraulic integrated system, mainly using NBR, code N41, which contains about 50% of the total. Quantitative testing reports also support a variety of third-party testing.

    说明:
    我企业耐高温橡胶接头阀体上有材质标识区,箭头指向NBR,如果箭头没有指向NBR,那么该产品不是丁腈橡胶接头,请勿在耐油环境使用,避免带来安全隐患,可以联系大家
    Explain:
    There is a material identification area on the valve body of our company's high-temperature resistant rubber joint, and the arrow points to NBR. If the arrow does not point to NBR, the product is not NBR joint. Please do not use it in acid-base and high-temperature resistant environment to avoid potential safety hazards. You can contact us.
    ·
    名称:耐油橡胶接头
    型号:KXT-NBR-150
    口径:DN150(了解该产品参数信息请点击:【样册P33】KXT型可曲挠橡胶接头
    压力:1.6Mpa
    长度:180mm
    轴向压缩:18mm
    轴向拉伸:10mm
    横向位移:12mm
    偏向角度:15°
    橡胶材质:丁腈橡胶N41
    法兰材质:球墨QT450(另外还有碳钢、不锈钢、PVC材质可选择)
    法兰标准:GB/T 9119-2000 (除此法兰标准之外,我厂还可以配套更多法兰标准,如需了解其他法兰标准请点击:橡胶接头法兰标准
    适用介质:液压油、润滑油、乳化液;(注明:航空煤油、柴油、汽油,不能用,要选择内衬聚四氟乙烯橡胶接头才可以使用
    使用优点:减震、降噪、保护液压设备的长期使用,降低维修成本。
    质保期限:12个月
    生产厂家:皇冠手机网登录网址
    资质证书:合格证、质保书、检验报告、国家型式试验报告、第三方性能检测报告、含量成分检测报告。
    Name: oil resistant rubber joint
    Model: KXT-NBR-150
    Caliber: DN150
    Pressure: 1.6Mpa
    Length: 180mm
    Axial compression: 18mm
    Axial tension: 10mm
    Lateral displacement: 12mm
    Deviation angle: 15 degrees.
    Rubber material: nitrile rubber N41
    Flange material: QT450
    Flange standard: GB/T 9119-2000
    Applicable media: hydraulic oil, lubricating oil, emulsion; (Note: aviation kerosene, diesel, gasoline, can not be used.)
    Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
    Warranty period: 12 months.
    Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
    Qualification Certificate: Qualification Certificate, Quality Guarantee, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

    ·

    以下是淞江集团先容:

    The following is the introduction of Songjiang group

    相关链接:橡胶接头工程案例


    XML 地图 | Sitemap 地图